SFOM096YZ4-12864WB-02
Specification.pdf
Product Introduction
0.96-inch OLED with 4-pin PCB is a miniaturized display module
widely used in embedded systems and portable electronic devices.
This type of display screen plays an important role in fields such
as smart watches, health trackers, and industrial equipment due to
its small size, low power consumption, and high contrast. Due to
its modular design, it can be easily integrated into various
electronic products, providing users with intuitive information
display.
In addition, driver ICs for 0.96-inch OLED with 4-pin PCB modules
such as SSD1306, SSD1315, etc., due to their standardized design,
further enhance their versatility on various devices. This high
level of compatibility provides great convenience for users when
designing embedded systems or DIY projects.
Features
0.96-inch OLED with 4-pin PCB products typically have the following
technical specifications:
- Resolution: 128x64 pixels, providing clear text and image display.
- Driver chips, such as the SSD1306/SSD1315 chip, are compatible with
multiple development platforms, simplifying the development
process.
- Working voltage: usually between 3V and 5V, with good power
compatibility, compatible with 3.3V and 5V logic levels, without
the need for additional level conversion chips.
- Viewing angle: With a super large viewing angle greater than 160 °,
it ensures good display performance at different viewing angles.
- Color options: Provides multiple color options such as yellow blue,
white light, and pure blue to meet different visual needs and
design preferences.
- Display mode: Supports multiple display modes, including graphic
and text display, suitable for various information display needs.
- Power consumption: Under normal display conditions, the power
consumption is only 0.06W, much lower than traditional TFT
displays, making it suitable for applications with strict power
consumption requirements.
- Installation method: The 4-pin PCB design allows for fixation
through standard circuit board installation procedures while
providing good electrical connections.
- Signal integrity: Considering the stability and reliability of
signal transmission, PCB wiring should be as short and direct as
possible to reduce signal interference
- Heat dissipation design: OLEDs generate heat during operation, and
PCB design should consider heat dissipation pathways, such as
optimizing thermal management through layout or heat dissipation
pads.
- Anti interference design: To reduce electromagnetic interference
(EMI), PCB design should adopt appropriate shielding and filtering
measures.
Outline Drawing
Interface Pin Definition
| Pin No. | Symbol | Description |
| 1 | GND | round of Logic Circuit. This is a ground pin, it must be connected
to ground. |
| 2 | VDD | Power Supply for OLED. This is a voltage supply pin. it must be
connected to source. |
| 3 | SCL | This serial clock input SCL |
| 4 | SDA | This serial data input SDA |
Electro-Optical Characteristics
| Items | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Operating Luminance | L | 80 | 100 | - | cd /m2 | All pixels ON |
| Power Consumption | P | - | 50 | 60 | mW | 30% pixels ON |
| Frame Frequency | Fr | - | 105 | - | Hz | - |
Color Coordinate | Blue | CIE x | 0.11 | 0.15 | 0.19 |
CIE1931 | Darkroom |
| CIE y | 0.21 | 0.25 | 0.29 |
Response Time | Rise | Tr | - | 10 | - | us | - |
| Decay | Td | - | 10 | - | us | - |
| Contrast Ratio | Cr | 10000:1 | - | - | - | Darkroom |
| Viewing Angle |  θ | 160 | - | - | Degree | - |
| Operating Life Time | Top | 22000 | - | - | Hours | L= 80 cd/m2 |
Product Image
Reliability Test
| No. | Item | Condition | Quantity |
| 1 | High Temperature Storage (HTS) | 85±2℃, 200 hours | 3 |
| 2 | High Temperature Operating (HTO) | 80±2℃, 96 hours | 3 |
| 3 | Low Temperature Storage (LTS) | -40±2℃, 200 hours | 3 |
| 4 | Low Temperature Operating (LTO) | -40±2℃, 96 hours | 3 |
5 | High Temperature and Humidity Storage (HTHHS) | 50±3℃, 90%±3%RH, 120 hours |
3 |
6 | Thermal Shock (Non-operation) (TS) | -20±2℃ ~ 25℃ ~ 70±2℃ (30min) (5min) (30min) 10cycles |
3 |
| 7 | Vibration (Packing) | 10~55~ 10Hz,amplitude 1.5mm, 1 hour for each direction x, y, z | 1 Carton |
| 8 | Drop (Packing) | Height : 1 m, each time for 6 sides, 3 edges, 1 angle | 1 Carton |
| 9 | ESD (finished product housing) | ±4kVR:330Ω; C:150pF 10times,air discharge | 3 |
Compare with competitors
In the market of 0.96-inch OLED with 4-pin PCB products, there are
multiple competitors with different advantages and characteristics.
Compared to its competitors, SAEF TECHNOLOGY has the following
advantages:
Technology and Innovation Capability: SAEF has a deep accumulation in OLED display technology, which can
provide products with high resolution and excellent color performance,
while continuously launching innovative products to meet market
demand.
Capacity and Supply Chain: SAEF has strong production capacity and a comprehensive supply
chain system, which can ensure stable product supply and quickly
respond to market changes.
Customized Services: SAEF can provide customized services to design and produce
0.96-inch OLED with 4-pin PCB products of specific specifications
according to customer needs, meeting the requirements of specific
application scenarios.
Brand influence: The SAEF brand has higher recognition and trust in the market, and
our products can gain more market attention and customer choice.
Facilities and Certificates
Contact Us
We love to hear about your projects, If you have any questions, we
can be reached at sales2@saef.com.cn
