Circular TFT 1.3" Inch 240x240 Touch Screen ST7789V SPI Interface
China Factory Supply Round LCD
1.3" inch Rouch TFT Touch Screen LCD Description
1. SF-TC130B-8813A-CT TFT LCD module is a 1.3”inch diagonal size
circular mode 240x240 full color display.
2. SF-TC130B-8813A-CT is with capacitive touch screenand it
supports SPI Interface.
3. SF-TC130B-8813A-CT model is having diameteractive area size of
48.96x73.44 mm.
4. SF-TC130B-8813A-CT is integrated with ST7789V controller on
module, and its logic supply voltage ranges from 3V to 3.6V.
5. The surface luminance of SF-TC130B-8813A-CT is 300 cd/m2 (Nits).
If you wish brighter backgound, please contact with us for more
technical support. the surface brightness can be achieved to be
1000 cd/m2 (nits).
| Product: | 1.3" Inch Circular TFT Touch Screen | Resolution: | 240x240 |
|---|
| Driver IC: | ST7789V Or Equivalent | Touch Screen: | With PCAP Capacitive Touch Screen |
|---|
| Cover Glass Dimension: | Customizable | Viewing Direction: | IPS All Viewing Angles |
|---|
| Interface: | SPI (can Be Customized) | Connection: | Connector Type ( Customizable) |
|---|
| Pin Number: | 24 Pins (can Be Customized) | Surface Luminance: | 300 Cd/m2(nits) ( Customizable) |
|---|
| LED Lifetime: | 40,000 Hours | Compliance: | REACH & RoHS Compliant |
|---|
Quality Management
1. Quality policy
Provide sound quality and deliver goods on time;
To satisfy requirements of customers with continuous improvement
2. EHS policy
To observe laws and regulations and to prevent and control
pollution;
To try to reduce emission and conserve and make full use of
resources;
To improve environmental protection awareness and continuously
improve the environment;
3. Measures adopted
It will make transparent its quality policy and improve employees’
awareness on quality via training and education;
By implementing ‘5S’ management, it will make office and production
spot tidy and orderly and employees well-trained;
It will make sure that the ISO9001 quality guarantee system cover
all rounds affecting qualities of products and services before
incorporating them to regulated and procedural management and
control;
Under the premise that quality is guaranteed, it will reduce
production costs including reduction of costs of raw materials and
improvement of production and managerial efficiency;
Product Advantages
1.IPS full viewing angle(80/80/80/80). Very good viewing angle.
Perfect for different kinds of applications, regardless of putting
on top, or on the table, or used handheld, etc.
2.Excellent display performance of background color, luminance,
viewing angle, and intensity, etc.
3.Wide Temperature of Top of -10℃ to +60℃ for industrial
applications.
4.Flexible to have with or without resistive touch screen. We can
support to design customized CTP(capacitive touch panel) for
customers as well. FPC is customizable too.
5.Low-cost solution among the same kinds in the LCD industry.
6.Easy to install and easy to maintain.
FAQ:
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples of different item numbers are acceptable.
Q2. What about the lead time?
A: For off-shelf products, in-stock samples immediately. 1-1.5 wks
for sample remaking. 4-6 wks for mass production. For design-in
products, 2-3 days for counter drawing proposal; 2 wks for sample
making at drawing approval; 5-6 wks for trial-run/mass production
at sample approval.
Q3. Do you have any MOQ limit for sample and production order?
A: Low MOQ. 3-5pcs for sample checking is available. Mass
production MOQ is normally 1K/lot. We support qty lower than MP MOQ
for trail-run/PP-run order.
Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 5-7 days to arrive.
Airline and sea shipping also optional.
Q5. How to proceed an order for LCD module?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the LCD product?
A: Yes. Please inform us formally in design stage, and we will make
samples with your logo for your sample test and approval. At sample
approval, the mass production will follow the approved samples.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lcds with
new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
1.3" inch Rouch TFT Touch Screen LCD Drawing
1.3" inch Rouch TFT Touch Screen LCD Real Product Photo
FACTORY AND FACILITIES
Search keyword: tft 3.5", 3.5 tft lcd, 3.5" tft lcd, 3.5 inch tft
lcd, tft lcd 3.5, 3.5 tft display, 3.5" tft display, 3.5 inch tft
display, tft display 3.5 inch, tft display 3.5", 3.5 inch tft lcd
display, 3.5" tft screen, 3.5 inch tft screen, tft screen 3.5 inch,
tft screen 3.5", 3.5 inch tft lcd screen, HVGA TFT, 3.5 inch HVGA,
3.5 inch 320x480, ILI9488 TFT.
CONTACT
Welcome to inquire via ck@saef.com.cn
